www.kodak.com/go/aiosupport 95
KODAK OFFICE HERO 6.1 All-in-One Printer
Preparing a fax for transmission
Before you send a fax, prepare a cover page (if needed), load the original(s), and
change the resolution and brightness (if needed).
Printing a fax cover page
If you need a fax cover page, you can print one with your printer, then manually
complete the information (person to whom you are sending, fax number, your
name, etc).
To print a fax cover page:
1. Press Home.
2. Press to select Fax Settings, then press OK.
3. Press to select Print Fax Cover page, then press OK.
4. Load letter or A4 paper, then press Start Black or Start Color to begin printing.
NOTE: It does not matter which Start button you press; the fax cover prints in
black-and-white only.
Loading originals for faxing
To fax documents (up to 35 pages) that are on plain paper, load the original(s) face
up in the Automatic Document Feeder (ADF).
IMPORTANT: The ADF accepts plain paper originals from 6.9 to 8.5 in. (18 to 22 cm) wide
and 9.8 to 14 in. (25 to 36 cm) long.
To fax a photo, documents on thick or thin paper, or a document that is too small or
too large to fit in the ADF, place the original face down on the scanner glass. You can
fax only one page at a time from the scanner glass.
For more information on loading originals, see Loading originals, page 45.
Setting fax option for one-sided or two-sided original
Before sending your fax, select whether the original is one-sided or two-sided:
1. Press Fax.
2. With Fax Options selected, press OK.
3. Press to select Original.
4. Press to select 1-sided or 2-sided.
NOTE: If you do not want to save these settings, send your fax. The settings will
apply only to the current transmission. If you want to save these settings as
defaults:
a. Press to select Save as Defaults, then press OK.
b. Select Ye s , then press OK.
