4
D
1509)50-4
Electrical Connection
Fuses
Your appliance comes fitted with a plug and a 13A fuse. If
you need to replace the fuse, only those rated at 13A and
ASTA approved to BS1362 should be used. If you lose
the fuse cover, a replacement may be obtained from your
local authorised Service Centre or Electrical company.
Correct replacement is identified by colour coding or the
marking on base of plug.
WARNING: DO NOT use the plug unless the fuse
cover is fitted.
WARNING: This appliance must be earthed.
Safety Information
At the time of delivery...
All functions of your dishwasher have been thoroughly
tested at the factory. A small number of water marks
may have been left as a result, they will disappear when
the appliance is used for the first time.
- This appliance should only be connected to a 230/240V
AC source, via a properly installed earthed socket.
- Use the dishwasher solely in a domestic environment.
- DO NOT stand or place heavy objects on the door when
it is open, this could damage the door or cause the
appliance to tip forward.
If your family includes children...
- DO NOT allow children to play with the appliance or
tamper with its controls.
- Keep detergents and rinse aids away from children.
Keep children away from the open door of a
dishwasher, there could still be some detergent left
inside.
CAUTION:
The dishwasher meets the requirements set out by the
regulations in force concerning safety and electrical
equipment.
Any technical checks should be conducted exclusively by
a trained and authorised technician: Repairs carried out
by unaithorised persons will invalidate the guarantee, as
well as posing a potential hazard to the user.
The manufacturer declines all responsibility for
damage to persons or property resulting from failure to
observe the above precautions, from tampering with even
a single component or from the use of non-original spare
parts.
Changing the Plug
Cut off and dispose of the supplied plug if it does not
fit your socket.
To avoid a shock hazard DO NOT insert the
discarded plug into a socket anywhere else.
Wires in the mains lead are coloured accordance with the
following code:
Green/Yellow - Earth
Blue - Neutral
Brown - Live
If you change the plug, the colour of the wires in the
mains lead may not correspond with the terminal
markings in the plug, which if not coloured, could be:
EARTH ‘E’ or
NEUTRAL ‘N’
LIVE ‘L’
Changing the Mains Lead
A lead can be ordered from Hotpoint Service
UK: 08709 066 066 or
Republic of Ireland: 1850 302 220
- If you have damaged the existing lead or require a
longer one a charge will be made. It is strongly advised
that this work is carried out by a qualified electrician.
- If the domestic wiring includes a residual current-
operated circuit breaker, ensure that it conforms to the
latest regulations.
The dishwasher must not be connected to the electricity
supply while installation is being carried out.
- This appliance should only be connected to a 230/240V
AC source, via a properly installed earthed socket.
- Use the dishwasher solely in a domestic environment.
- DO NOT stand or place heavy objects on the door when
it is open, this could damage the door or cause the
appliance to tip forward.
Once the appliance has been installed, the power
supply cable and the electrical socket should be easily
accessible.
The cable should not be bent or compressed.
If the power supply cable is damaged, it must be
replaced by the manufacturer or its Technical Assistance
Service in order to prevent all potential hazards. (See
Assistance)
The Company shall not be held responsible for any
incidents that occur if these regulations are not observed.
