[ pg. 44]
8.2. Advanced
To change more advanced wireless features of the ESR350H, select the Advanced option of the Wireless section.
In the Advanced option, you can change the following:
Fragment Threshold: This specifies the maximum size of a packet during
data transmission. A value too low could lead to low performance.
RTS Threshold: If the packet size is smaller than the RTS threshold, the
ESR350H will not use RTS/CTS to send the data packet.
Beacon Interval: This is the amount of time that the ESR350H will
resynchronize the network.
Delivery Traffic Indication Message (DTIM) Period: The DTIM is a
countdown informing clients of the next point of broadcast and multicast
messages over the network. This is a value between 1 and 255.
N Data Rate: This is the rate in which the ESR350H will transmit data
packets to Wireless N compatible devices.
Channel Bandwidth: The factory default enables Auto 20/40MHz to
optimize the best performance by auto selecting channel bandwidth.
Preamble Type: Select either Long Preamble (better LAN compatibility) or Short Preamble (better wireless performance).
CTS Protection: CTS Protection is recommended. It can lower the data collisions between Wireless B and Wireless G devices. Enabling CTS
protection will lower data throughput of the ESR350H.
Tx Power: Select the wireless signal strength level. Valid values are between 10% and 100%.
Click Apply to save your settings.
