[ pg. 42]
8. Wireless LAN
8.1. Basic
In the Basic Wireless Setup (Located in the Wireless section in the Main Menu), select Basic and you can quickly enable and configure the Wireless
network.
Radio: You can turn on/off the wireless radio. If wireless Radio is off, you cannot set an
access point through wireless.
Mode: Select Access Point mode or Wireless Distribution Service (WDS) mode for your
router.
AP: Use the ESR350H as a Wireless Access Point for wireless devices to connect.
WDS: In a WDS, access points are used to expand the wireless area by connecting to
each other, without all of them having a wired backbone. To set up a WDS, enter the
MAC Addresses of the other Access Points configured for WDS (up to 4 maximum) and set the WDS rate.
Set Security: you can select disable, WEP, or WPA for WDS security.
Band: You can select one of the wireless standards for your wireless network. The options are: 2.4 GHz (B), 2.4 GHz (G), 2.4 GHz (N), 2.4 GHz (B+G),
2.4 GHz (B+G+N).
Enable SSID#: Set the number of Wireless Groups. Up to 4 can be set.
SSID[#]: The Name of the wireless network.
Auto Channel: Auto channel is enabled by default. If you wish to select an appropriate channel for your wireless network, please disable Auto
Channel, and select channel.
Check Channel Time: If Auto Channel is enabled, please select time period you wish the system
check the appropriate channel for your router.
