[ pg. 8]
1.3. Wall Mounting
Mounting the ESR300H to a wall will allow the wireless range to be optimized. To mount the device in the wall, measure the distance of the
mounting holes of the ESR300H and drill the appropriate holes on the wall location. Once the nails are secure, firmly lock the mounts onto the
ESR300H.
2. Installation
2.1. System Requirements
To begin installing the ESR300H, you need the following:
• Computer (Windows, Linux, OSX Operating System)
• CD-ROM*
• Web Browser (Internet Explorer, FireFox, Chrome, Safari)
• Network Interface Card with an open RJ-45 Ethernet Port
• WiFi Card or USB WiFi Dongle (802.11 B/G/N)**
• External xDSL (ADSL) or Cable Modem with an open RJ-45 Ethernet Port
• CAT5 Ethernet Cables
*Windows Only: Using ESR300H Setup CD
**Optional
2.2. Setup Notes
When considering the placement of the ESR300H remember the following:
• The ESR300H must be close to the DSL or Cable Modem and a Power Source. Initially, it needs to be closed to the computer that is
used to set up the ESR300H.
• Placing the ESR300H in the center of the office space will result in the most optimal wireless range.
• The higher the placement of the ESR300H, the better wireless range it will have.
• Other electronic devices can cause interference, which will cause the wireless range of the ESR300H to diminish.
