
Table 3~1. System Messages (continued)
Message Cause
Corrective Action
Invalid
configuration
information -
please run
SETUP program
Incorrect ISA_CLR
jumper configuration,
incorrect configuration
settings in System Setup
program, or faulty
battery
Remove the plug from the
ISA-CLR jumper. See Appen
dix B, "Jumpers, Switches,
and <i)onnectors," for instruc
tions. Check the System Setup
configuration settings. See
Chapter 4, "Using the System
Setup Program," in the system
User's Guide for instructions.
Replace the battery. See
Chapter 8, "Installing System
Board Options."
Invalid CPU
speed
detected -
check jumpers
Incorrect microproces
sor jumper configuration
Check the microprocessor
speed jumper. See Appendix B,
"Jumpers, Switches, and
Connectors."
Invalid NVRAM
configuration,
resource
reallocated
System detected and
corrected a resource
conflict when system
resources were allo
cated using the RCU
No action is required.
I/O parity
interrupt at
address
Expansion card improp
erly installed or faulty
Reinstall the expansion cards
(see Chapter 8, "Installing Sys
tem Board Options"). If the
problem persists, replace the
expansion card.
Keyboard clock
line failure
Keyboard
failure
Keyboard cable connec
tor loose or Improperly
connected, defective
keyboard, or defective
keyboard/mouse control
ler (defective system
board)
Check the keyboard cable con
nection. Replace the keyboard.
If the problem persists,
replace the system board.
See Chapter 12, "Getting
Help," for instructions on
obtaining technical assistance.
Keyboard
controller
failure
Defective keyboard/
mouse controller (defec
tive system board)
Replace the system board.
See Chapter 12, "Getting
Help," for instructions on
obtaining technical assistance.
Keyboard data
line failure
Keyboard stuck
key failure
Keyboard cable connec
tor loose or Improperly
connected, defective
keyboard, or defective
keyboard/mouse control
ler (defective system
board)
Check the keyboard cable con
nection. Replace the keyboard.
If the problem persists,
replace the system board. See
Chapter 12, "Getting Help,"
for instructions on obtaining
technical assistance.
NOTE: For the full name of an abbreviation or acronym used in this table, see the abbreviation and
acronym list that precedes the Index
3-4 Dell PowerEdg&i350 ^sterns Installation and Troubleshooting Guide