Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide 111
4
Distinctive Ring Settings
Caller number patterns are matched from Ring 1 to Ring 8. The first match (not the
closest match) will be used for alerting the subscriber.
Ring Settings
Media Loopback
Mode
The loopback mode to assume locally when making call to
request media loopback. Choices are: Source and Mirror.
Default setting: Source
NOTE If the SRP answers the call, the mode is determined
by the caller.
Media Loopback
Type
The loopback type to use when making call to request
media loopback operation. Choices are Media and Packet.
Default setting: Media
Note that if the SRP answers the call, then the loopback
type is determined by the caller (the SRP always picks the
first loopback type in the offer if it contains multiple type)
Field Description
Ring1 - 8 Caller Caller number pattern to play Distinctive Ring/CWT 1, 2, 3,
4, 5, 6, 7, or 8. Default setting: blank
Field Description
Default Ring Default ringing pattern, 1–8, for all callers. Default setting:
1
Default CWT Default CWT pattern, 1–8, for all callers. Default setting: 1
Hold Reminder
Ring
Ring pattern for reminder of a holding call when the phone
is on-hook. Default setting: 8
Call Back Ring Ring pattern for call back notification. Default setting: 7
Cfwd Ring Splash
Len
Duration of ring splash when a call is forwarded (0 – 10.0s)
Default setting: 0
Cblk Ring Splash
Len
Duration of ring splash when a call is blocked (0 – 10.0s)
Default setting: 0
Field Description
