Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide 108
4
FXS Port Polarity Configuration
User Settings (User 1 and User 2)
Use the Voice > User 1 and Voice > User 2 pages to set the user preferences for
the calls through the PHONE1 and PHONE2 ports.
To open this page: Click Voice on the menu bar, and then click Line 1 or Line 2 in
the navigation tree.
Call Forward Settings
Symmetric RTP Enable symmetric RTP operation. If enabled, the
SPA3102 sends RTP packets to the source address
and port of the last received valid inbound RTP
packet. If disabled (or before the first RTP packet
arrives) the SPA3102 sends RTP to the destination as
indicated in the inbound SDP. Default setting: no
Field Description
Idle Polarity Polarity before a call is connected: Forward or
Reverse. Default setting: Forward
Caller Conn Polarity Polarity after an outbound call is connected: Forward
or Reverse. Default setting: Forward.
Callee Conn Polarity Polarity after an inbound call is connected: Forward or
Reverse. Default setting: Forward
Field Description
Cfwd All Dest Forward number for Call Forward All Service. Default
setting: blank
Cfwd Busy Dest Forward number for Call Forward Busy Service. Same as
Cfwd All Dest. Default setting: blank
Cfwd No Ans Dest Forward number for Call Forward No Answer Service.
Same as Cfwd All Dest. Default setting: blank
Field Description
