TMA; Reviewed:
SPOC 6/19/2008
Solution & Interoperability Test Lab Application Notes
©2008 Avaya Inc. All Rights Reserved.
5 of 24
AW-i75-APP-50
Step Description
1. To enable the features used for testing (Call Park, Call Park Answerback, Call Forwarding and
Call Pickup) administer the configuration for Feature-Access-Codes (FAC) and Feature-Name-
Extensions (FNE) on Avaya Communication Manager. From the SAT (System Administration
Terminal) interface on Avaya Communication Manager use the “change feature-access-
codes” command to configure the following parameters on Page 1 and Submit the changes.
change feature-access-codes Page 1 of 7
FEATURE ACCESS CODE (FAC)
Abbreviated Dialing List1 Access Code:
Abbreviated Dialing List2 Access Code:
Abbreviated Dialing List3 Access Code:
Abbreviated Dial - Prgm Group List Access Code:
Announcement Access Code:
Attendant Access Code:
Answer Back Access Code: #11
Auto Alternate Routing (AAR) Access Code: 60
Auto Route Selection (ARS) - Access Code 1: 61
Call Forwarding Activation Busy/DA: #15 All: #16 Deactivation: #17
Automatic Callback Activation: Deactivation:
Call Forwarding Enhanced Status: Act: Deactivation:
Call Park Access Code: #10
Call Pickup Access Code: #12
CAS Remote Hold/Answer Hold-Unhold Access Code:
CDR Account Code Access Code:
Change COR Access Code:
Change Coverage Access Code:
Contact Closure Open Code: Close Code:
ESC-x=Cancel Esc-e=Submit Esc-p=Prev Pg Esc-n=Next Pg Esc-h=Help
