ARRIS Router Setup – Web GUI User’s Guide
Page 36 of 92 January 2012
equipped) and on your router, or by entering the enrollee’s PIN and then clicking the Start WPS
Association icon.
Device PIN Code: - Enter this code on your computer if requested during connection.
Encryption Mode – Sets the encryption method for WPS. Can be set to PBC (Push Button
Control) or PIN Code.
If using PBC, press the WPS buttons on the client device and on your router simultaneously to
start the WPS association. If using PIN codes, enter the enrollee’s PIN in the Enrollee PIN Code
field, and then click the Start WPS Association icon.
If the connection is successful, the WPS indicator light on the router stops flashing and remains
lit. If unsuccessful, the WPS light continues to flash for up to two minutes (indicating that it’s
ready to accept a client connection) and then turns off. If the WPS light turns off, start the
association process over.
Enrollee PIN Code – If your client device has a WPS PIN number, enter it here, then click the
Start WPS Association icon.
Start WPS Association – Click the WPS icon after entering the enrollee’s PIN to configure the
network connection to the device.