What to do if…28
2 short warning tones, con
tinuously repeated, can be
heard,
the programme display for
the selected wash programme
is flashing,
the indicator for the end of
the wash programme is flash
ing twice continuously .
(Rinse water has collected in
the dishwasher's interior con
tainer).
The siphon is blocked. Clean the siphon.
Water drain hose has not been
correctly positioned.
Check the position of the hose.
3 short warning tones, con
tinuously repeated, can be
heard,
the indicator for the end of
the wash programme is flash
ing three times continuously .
The antiflood system has been
triggered.
First turn off the water tap,
then switch off the appliance
and contact customer service.
The programme is not start
ing.
The mains plug is not plugged
in.
Connect the plug to a mains
socket.
A fuse in the house’s wiring
system is defective.
Replace fuse.
For dishwasher models with a
start delay timer:
A start time has been selected.
If the dishes are to be washed
immediately, cancel the start
delay.
Rust spots are visible in the
dishwashing compartment.
The dishwashing compart
ment is made from rustfree
stainless steel. Rust spots in
the dishwashing compartment
are due to rust particles from
external sources (rust particles
from water pipes, pans, cutlery,
etc.). Remove such spots with a
commercially available clean
ing product for stainless steel.
Only wash cutlery, dishes and
pans that are suitable for dish
washer use.
A whistling noise can be
heard when washing dishes.
The whistling is not a cause for
concern.
Decalcify appliance with com
mercially available agents for
cleaning dishwashers.
If the noises can still be heard
after decalcifying the machine,
use a different brand of deter
gent for washing cutlery and
dishes.
Malfunction Possible cause Remedy
