77
ELECTRICAL CONNECTION
For Great Britain only
Warning - this appliance must be earthed
Fuse replacement
If the mains lead of this appliance is fitted with a BS 1363A 13 amp
fused plug, to change a fuse in this type of plug use an A.S.T.A.
approved fuse to BS 1362 type and proceed as follows:
1.Remove the fuse cover (
A
) and fuse (
B
).
2.Fit replacement 13 A fuse into fuse cover.
3.Refit both into plug.
Important:
The fuse cover must be refitted when changing a fuse and if the
fuse cover is lost the plug must not be used until a correct
replacement is fitted.
Correct replacement are identified by the colour insert or the
colour embossed in words on the base of the plug.
Replacement fuse covers are available from your local electrical
store.
Socket outlet / plug
If the fitted plug is not suitable for your socket outlet, please
contact Whirlpool Service on 0870 600 8989 for further
instruction. Please do not attempt to change plug yourself. This
procedure needs to be carried out by a qualified Whirlpool
technician in compliance with the manufactures instructions and
current standard safety regulations.
For the Republic of Ireland only
The information given in respect of Great Britain will frequently
apply, but a third type of plug and socket is also used, the 2-pin,
side earth type. In this case, the wire which is coloured GREEN
AND YELLOW must be connected to the EARTH contact, and the
two wires to the two pins, irrespective of colour. The supply to the
socket must be fitted with a 16 amp fuse.
5gb10030.fm5 Page 77 Thursday, July 18, 2002 9:58 AM
Black Process Plate
