English - 13
INSTALLATION
Combine with an existing washing machine by sharing one water tap
1. Disconnect the water supply hose (A) from the existing
washing machine.
2. Connect the inlet T adaptor (B) to the inlet hole (C) of the
existing washing machine.
3. Connect the disconnected water supply hose (A) to the inlet
T adaptor (B).
4. Connect the water supply hose (D) for the sanitizing
washing machine to the inlet hole of the sanitizing washing
machine.
(*): applicable models only
5. Connect the water supply hose to the inlet T adaptor as
shown, and turn it clockwise to tighten. It fits with a clicking
sound.
(*): Rubber ring
To avoid water leaks, make sure the rubber ring is
secured around the T adaptor.
CAUTION: When finishing washing the laundry, close the water tap. Otherwise, this may
cause the following:
• If the water tap is not closed or not connected properly, water may leak especially in
winter.
• If the water tap is not closed, the supplied water may freeze inside the water hose.
• The water tap or hose could burst at a low temperature.
Untitled-1 13 2014-11-26 4:21:17
