PROBLEM CHECK & SOLUTION
The water leaks at the water supply
hose connector.
If the faucet connecting part is loose, water may leak.
Repeat the assembling steps again. (Refer to “Connecting the
water supply hose”)
Check if the rubber ring of the water supply hose is in the right
position.
Fit it tightly again.
Is the water supply hose folded?
Unfold the hose.
If the water supply is too strong, water may leak.
Close the faucet a little.
Is water leaking from the faucet itself?
Fix the faucet. Water is not supplied.
Did you press the Start/Pause button after selecting the water
supply?
The Start/Pause button must be pressed for water, for water
to be supplied. Press the Start/Pause button.
Make sure that the faucet is on.
Turn on the faucet.
Check if the filter net at the water supply hose connector is
clogged with dirt.
Clean the filter net using a toothbrush.
Make sure the water supply is on.
If the water supply is suspended, turn both the faucet and
power on.
Spinning causes loud noises and
vibrations.
Check if the laundry is spread out evenly in the washer.
Spread out the laundry evenly and start again.
Check if the washer is balanced and level on a sturdy flat floor
surface.
Ensure that the washer is level.
Check if the leveling legs are loose.
Adjust the leveling legs so that the washer is even.
Ensure that the washer is not surrounded with unnecessary
items.
Remove anything unnecessary away from the washer.
