troubleshooting and
information codes
CHECK THESE POINTS IF YOUR WASHER...
PROBLEM CHECK & SOLUTION
Has no power.
Check if the electric voltage is normal.
Check if the washer is plugged in. Make sure the electric cord is
plugged in.
Make sure that the drain hose is not twisted or folded.
Make sure that the drain hose outlet is not clogged.
Does Not Work
Is the washer lid open?
Close the lid.
Is the Hold button on?
Press the Start/Pause button again, and check if the washer
starts.
Has sufficient water filled up to the water level?
If the water pressure is low, it takes along time for water to fill
the washer.
Is the faucet closed?
Open the faucet to supply water.
Has the drain hose and spin basket
frozen.
• Add hot water to the frozen water tap and remove the drain
hose. Soak it in hot water.
• Pour hot water into the spin basket for about 10 minutes.
• Place a hot water towel on the drain hose connector.
• When the drain hose has been defrosted, reconnect it and
check if the water is draining properly.
