Delay Start
Use this to specify a time for the wash cycle to start, for example, when you need to go out and
are unable to monitor the washer.
1. Press the Power button to turn the washer “On”.
2. Press the Delay Start button.
You may set the delay end time using the Delay Start button from between 3 to 18 hours.
3. Press the Start/Pause button and add the appropriate amount of detergent into the
detergent drawer.
4. Close the lid.
The wash will finish by the set time.
Add detergent and softener according to the water level and close the lid.
• Detergent must be added into the detergent drawer.
• If detergent is added onto the laundry directly, some clothes may become discolored
because the start has been delayed.
• To cancel a Delay Start, press the Power button.
Air Turbo (Selected models)
This course saves you valuable time, ensuring that your clothes dry faster than from line drying.
1. Press the Power button turning the washer “On”.
2. Press the Air Turbo button.
Each time the Air Turbo button is presser, the operations are performed in the following order:
15min30minOFF
3. Close the lid.
4. Press the Start/Pause button.
• This can be selected as an additional option for all courses except for Wool course.
• The Air Turbo function is only available when Spin is selected.
• Select this when you want to half-dry the laundry.
