Select the Delay Start by
pressing button 8
Before you start the programme, if you wish
to delay the start, press this button to se-
lect the desired delay.
The selected delay time value will appear on
the display for a few seconds, then the du-
ration of the programme will appear again.
You must select this option after you have
set the programme and before you start the
programme.
You can cancel or modify the delay time at
any moment, before you press button 7.
Selecting the delay start :
1. Select the programme and the required
options.
2.
Select the delay start by pressing but-
ton 8.
3.
Press button 7:
- the machine starts its hourly count-
down.
- the programme will start after the se-
lected delay has expired.
Cancelling the Delay Start after having star-
ted the programme:
1.
Set the washing machine to PAUSE by
pressing button 7.
2.
Press button 8 once. On the display will
appear
'.
3. Press button 7 again to start the pro-
gramme.
Important!
• The selected delay can be changed only
after selecting the washing programme
again.
• The door will be locked throughout the
delay time. If you need to open the door,
you must first set the washing machine to
PAUSE by pressing button 7 and wait a
few minutes before opening the door. Af-
ter you have closed the door, press the
same button again.
Important! The Delay Start cannot be
selected with the draining programme.
Altering an option or a running
programme
It is possible to change some options be-
fore the programme carries them out.
Before you make any change, you must
pause the washing machine by pressing
button 7.
Changing a running programme is possible
only by resetting it. Turn the programme se-
lector dial to
and then to the new pro-
gramme position. Start the new programme
by pressing button 7 again.
The washing water in the tub will be not
emptied out.
Interrupting a programme
Press the button 7 to interrupt a pro-
gramme which is running, the correspond-
ing pilot light starts blinking. Press the but-
ton again to restart the programme.
Cancelling a programme
Turn the selector dial to to cancel a pro-
gramme which is running. Now you can se-
lect a new programme.
Opening the door after the
programme has started
First set the machine to pause by pressing
the button 7.
If the pilot light 9 blinks and after a few mi-
nutes goes off, the door can be opened.
If the pilot light 9 remains lit, this means that
the machine is already heating or that the
water level is too high. In any case, do not
try to force the door open!
If you cannot open the door but you need
to open it, you have to switch the machine
off by turning the selector dial to
. After a
few minutes the door can be opened.
(Pay attention to the water level and
temperature!).
After closing the door, it is necessary to se-
lect the programme and options again and
to press button 7.
At the end of the programme
The machine stops automatically. Some
acoustic signals sound and a blinking
ap-
pears on the display. The pilot light of but-
ton 7 and the pilot light 9 go off.
If you have set a programme or an option
that ends with water left in the tub, the pilot
light 9 remains on. The door is locked to in-
dicate that the water must be emptied out.
During this time the drum continues to turn
at regular intervals until water draining.
Follow the below instructions to empty out
the water:
16
