if the selected programme/option it requires
(see more details in «Detergent dispenser
drawer»).
If required, pour fabric softener into the
compartment marked
(the amount used
must not exceed the «MAX» mark in the
drawer). Close the drawer gently.
Select the required programme
by means of the programme
selector dial (1)
Turn the programme selector dial to the re-
quired programme.
The green pilot light of button 7 starts to
flash. The selector dial can be turned either
clockwise or anticlockwise.
Turn the selector dial to position
to reset
the programme/to switch the machine OFF.
At the end of the programme the selec-
tor dial must be turned to position
,
to switch the machine off.
Important! If you turn the programme
selector dial to another programme when
the machine is working, the red pilot light of
button 7 will blink 3 times and the
messageErr is displayed to indicate a
wrong selection. The machine will not
perform the new selected programme.
Select the spin speed by
pressing button 2
When selecting a programme, the appli-
ance proposes automatically the maximum
spin speed provided for that programme.
(See "Washing programmes" for the maxi-
mum allowed spin speed).
Press this button repeatedly to change the
spin speed, if you want your laundry to be
spun at a different speed. The relevant pilot
light illuminates.
Select the available options by
means of buttons 3, 4, 5 and 6
Depending on the programme, different op-
tions can be combined. These must be se-
lected after choosing the desired pro-
gramme and before starting the pro-
gramme. When these buttons are pressed,
the corresponding pilot lights illuminate.
When they are pressed again, the pilot
lights go out. If an incorrect option is selec-
ted, the integrated red pilot light of the but-
ton 7 flashes 3 times and the message Err
is displayed.
For the compatibility among the washing
programmes and the options see chapter
«Washing programmes».
Start the programme by
pressing button 7
To start the selected programme, press this
button; the corresponding green pilot light
stops blinking.
The pilot light 9 illuminates to indicate that
the appliance starts operating and the door
is locked.
If you have chosen a delayed start, the ma-
chine will begin the countdown.
Important! If an incorrect option is
selected, the message Err is displayed for
a few seconds and the red pilot light of this
button blinks 3 times.
15
