RouteFinder MTASR3 User Guide
MTASR3
20
Introduction
The following loading procedure does not provide every screen or option in the process of installing
the RouteFinder software. It is assumed that a technical person with a thorough knowledge of
Windows and the software loading process is doing the installation.
Loading your Software
1. Run Windows on the PC that is connected to the RouteFinder’s Command Port.
2. Insert the RouteFinder 3.00 Disk 1 into the disk drive on the PC that is connected to the RouteFinder.
3. Win3.1 users - access Run by clicking on the File menu in Program Manager and then click Run. In
the Run dialog box, type a:\setup or b:\setup (depending on the letter of your floppy disk drive) in
the Command Line field and then click OK.
Win95/NT users - click Start, then Run. In the Run dialog box click the down arrow and choose
a:\setup or b:\setup (depending on the letter of your floppy disk drive) in the Command Line field
and then click OK.
4. The Welcome screen is displayed.
Press Enter or click Next> to continue.
5. Follow the on-screen instructions to install your RouteFinder software.
6. Press Enter or click Next> to continue.
7. When the Select Program Folder dialog box appears, double-click the word “RASFinder” and delete
it (and preceding spaces, etc.) leaving the word “RouteFinder” in the text box; this will become the
name of the icon group. Press Enter or click Next> to continue.
