Adjust Sensor wash
You can adjust the Sensor wash
programme so that it will remove
stubborn soiling in a lightly soiled load.
^
Open the door.
^
Switch the dishwasher off using the
On/Off button K.
^
Press the Programme selector button
in, and whilst holding it in switch
the dishwasher on using the On/Off
button K.
Keep the programme selector button
pressed in until the lower right hand
programme indicator comes on.
If this does not happen, start the
procedure from the beginning again.
^
Press the Turbo button five times.
The Turbo indicator will flash briefly 5
times at intervals.
The flashing sequence in the display
shows what the current setting is.
–
"p1": The "Adjust Sensor wash"
function is activated.
–
"p0": The "Adjust Sensor wash"
function is deactivated.
^
If you want to change the setting,
press the Programme selector
button.
The setting is now stored in memory.
^ Switch the dishwasher off using the
On/Off button K.
Additional functions
39
