Productos de la Marca Leica-biosystems

Leica IP C

Back panel of instrument

Electrical connections

Connecting to power supply

• Makesuretheprinterisswitchedoff,power

switch (62) in position "0" = OFF.

• Insertthecorrectpowercordintothepower

input socket (63).

• Switch the instrumentonwith the power

switch (position "I" = ON).

Fig. 34

Connecting a remote alarm device

• Ifrequired,connecttheexternalalarmsystem

(optional) to jack (61).

• Theremotealarmdeviceisconnectedtothe

printer via a 3.5 mm-diameter jack connector

(optional accessory).

• Fordetails about the remote alarm see

chapter 5.3.

Setting up the data connection

• Tousetheprinter,aserialdatacableisre-

quired (part of standard delivery).

• Connectthecabletooneoftheserialports

(COM 1, COM 2) of the computer containing

the control software.

• Connectthe

cable to

printer port

(60).

Fig. 35

4. Instrument Setup

4.8 Electrical connection

The instrument must be connected to a grounded power socket.

Of the set of power cords supplied, be sure to use only the one that is appropriate for the local

power supply (plug must fit on-site wall outlet).

Once switched on for the first time, the

power switch (62) should always re-

main in position "I" = ON.