Productos de la Marca Leica-biosystems

Instructions for Use V 1.9 RevD – 05/2013

Fig. 45

4. Instrument Setup

Exchanging the cartridge (continued)

Fig. 42

Fig. 44

Fig. 43

• Removetheinkcartridge(66) from the delivery

carton and shake it a few times, then remove

the protective foil.

• Theink cartridge mustbereplaced after

60,000 printouts or 3.5 months. The instrument

setup date can be recorded on the white sur-

face (65) on the front (Fig. 44).

• Insertthecartridgeintotheslot.Loosenthe

red screw-on cap one full turn but do not

remove it yet.

• Insertthecartridgecompletelyintotherecep-

tacleapplyingmoderatepressure.Youhave

to use a certain amount of force to pierce the

seals.

• Withdraw the cartridge from its slot by about

1,25 inches (30 mm) and push it back in as

far as it will go; repeat this step two or three

times.

• Nowunscrewthered screw cap (87) com-

pletely from the nozzle of the cartridge and

store it in the recess provided in the cartridge

for this purpose ( Fig. 43, 44).

This step is very important to ensure

safe operation of the printer.

Very important!

Prior to each transport, the cap (87)

must be screwed onto the nozzle to

prevent the ink from spilling.

• Rightnexttotheslotopeningthereisasafety

catch (86, Fig. 45). Moving this catch to the side

secures the ink cartridge against falling out.