1-6
1. 4 Specifications
Subject Specification
Model KIP Color 80
Type Console
Printing method LED - Electro Photography
Color CMYK
Photoconductor Organic Photoconductive Drums
Print speed 80mm / second (3 A0 / minute - 2200 sq. ft. / hour)
Exposure method Multi-Level (4-Bit) LED Print Head
Resolution 600dpi x 600dpi
Print width Maximum : 36 inches
Minimum : 11 inches
Print length Maximum : Plain paper : 19.7 ft
Tracing paper : 19.7 ft
Film : 48”
Glossy paper : 48”
Minimum : 17 inch)
NOTE : If the print is longer than 6m, KIP does not guarantee
image quality or the reliability of media feeding systems.
Warm up time Less than 6 minutes
(At 23C, RH= 60% and 220Vac line voltage)
First print time Shorter than 45 seconds (A0 or E)
Fusing method Roller - heat pressure fusing
Development Contact type mono component non-magnetic development system
Charging method Corona -Self Cleaning
Media feeding method Automatic (4 Roll Decks) and manual (50 cut sheets capacity)
Transfer method Corona
Separation method Corona
Input power 220 to 240V (+6% to -10%), 20A and 50/60Hz
Interface KIP LVDS
Maximum power
consumption
On 230V, 50/60Hz and Dehumidify Heater is ON
Stand by 0.8 Kwh
Printing 2.6 Kwh
Warm up 2.6 Kwh
Acoustic noise Less than 70db (Printing)
NOTE : Impact noise such as cutting sound is excluded.
Less than 55db (Stand by)
Ozone Less than 0.05ppm (Average of 8 hours)
Dimensions 1544mm (Width) x 942mm (Depth) x 1435mm (Height)
(61”x37”x57”)
Weight About 1000 kg or 2200lbs
Media See Media Specification
