8
Power synchronization cases
The Fiery Color Server synchronizes power with the printer depending on the power state of
both the printer and the Fiery Color Server.
Error cases
The Fiery Color Server requires time after the operating system and the system software starts
up to set the correct synchronization signals between the Fiery Color Server and the printer. If
a power outage occurs, an error might occur that leads to the system performing a first-time
boot up. The system administrator might need to manually boot up the Fiery Color Server
separately from the printer.
Sleep mode cases
The Fiery Color Server turns off and remains in OFF status if the operator shuts down the
Fiery Color Server while the printer is in sleep mode. Sleep mode remains activated until the
operator turns on the Fiery Color Server or when the printer is in ready status.
System software reinstallation cases (for service technicians only)
You can reinstall system software without affecting the power state of the Fiery Color Server
and the printer.
Printer power state Fiery Color Server
power state
Result of power synchronization
OFF OFF, then ON
1. Fiery Color Server turns on.
2. Fiery Color Server checks that the
printer is turned off.
3. Fiery Color Server turns off.
ON, then OFF OFF
Fiery Color Server turns off after
five minutes, then the Fiery Color
Server completes shutdown.
ON OFF, then ON
Fiery Color Server turns on and
remains turned on.
ON ON, then OFF
Fiery Color Server turns off and
then turns back on.
OFF, then ON OFF
Fiery Color Server turns on.
OFF, then ON ON
Fiery Color Server turns on.
ON, then OFF ON
Fiery Color Server turns off after
five minutes, then the Fiery Color
Server completes shutdown.
Not connected to a power source OFF, then ON
Fiery Color Server turns back off
after five minutes, when the Fiery
Color Server completes booting up.
Not connected to a power source OFF
Fiery Color Server remains off.
