
Fax Driver 2-11
Installing the fax driver
2
5 Click "Add a local printer".
The Select a Printer Port dialog box appears.
6 Click "Create a new port", and select "Standard TCP/IP Port".
7 Click the [Next] button.
8 Select "TCP/IP Device", and then enter the IP address.
– When both LPR and Port9100 are enabled for this machine, the printer driver and the machine is
connected with LPR.
9 Click the [Next] button.
– If the Additional Port Information Required dialog box appears, go to step 10.
– If the "Install the printer driver" dialog box appears, go to step 13.
10 Select "Custom", and then click the [Settings] button.
11 Change the settings according to the port, and then click the [OK] button.
– For an LPR connection, select "LPR", and then enter "Print" in the "Queue name" box.
– For a Port9100 connection, select "RAW", and then enter the RAW port number (9100 at default) in
the "Port Number" box.
– The information entered here is case-sensitive.
12 Click the [Next] button.
The "Install the printer driver" dialog box appears.
13 Click the [Have Disk] button.
14 Click the [Browse] button.
15 Specify the desired folder on the CD-ROM that contains the fax driver, and then click the [Open] button.
– Select the specified folder according to the printer driver to be used, the operating system, and the
language.
16 Click the [OK] button.
The "Printers" list appears.