Wireless LAN Features
Feature Description
WLAN Mode Access Point
WLAN standards 802.11n (Mimo 2x3); 802.11b; 802.11g; 802.11a; 802.11h
Frequency bands 2.4 GHz
indoor/outdoor (EU)
2.4 GHz Indoor/Outdoor (2412-2472 MHz) max. 100 mW EiRP. This information is related to
the permitted transmission power in Germany. The permitted transmission power may vary in
other countries.
Frequency bands 5 GHz indoor (EU) 5 GHz indoor (5150-5350 MHz) max. 200 mW EiRP allowed. This information is related to the
permitted transmission power in Germany. The permitted transmission power may vary in
other countries.
Frequency bands 5 GHz outdoor (EU) 5 GHz outdoor (5470-5725 MHz) max. 200 mW EiRP allowed. This information is related to
the permitted transmission power in Germany. The permitted transmission power may vary in
other countries.
WLAN modes 2.4 GHz operation: 802.11b only; 802.11g only, 802.11b/g/n mixed; 802.11b/g/n mixed long;
802.11b/g/b mixed short; 802.11b/g/n; 802.11g/n; 802.11n only; 5 GHz Operation: 802.11a
only; 802.11a/n; 802.11n only
Automatic Rate Selection (ARS) Available
Transmission rate Automatic fallback or fixed transmission rate selectable
Data rates for 802.11a,h (5 GHz) 54, 48, 36, 24, 18, 12, 9 and 6 Mbps (OFDM modulation)
Data rates for 802.11n (2.4 / 5 GHz) MSC0-15 enables physical rates up to 150 Mbps at 20 MHz channels bandwidth, 2 streams,
short guard interval; MSC0-15 enables physical data rates up to 300 Mbps at 40 MHz
channels bandwidth, 2 streams, short guard interval
Roaming (access point mode) Seamless roaming with IAPP (artem Inter Access Point Protocol)
Number of spatial streams (802.11n) 1 or 2
Broadcast SSID On/off switchable
Broadcast SSID Data prioritization for TOS data, 802.11e/WMM
WMM 802.11e Power Save Support of active WLAN clients, which support 802.11e power save
Country-specific settings Channel settings according regulatory domain (802.11d) permitted.
WDS Wireless Distribution System: Include high security TKIP and AES, interoperable with other
devices from the Funkwerk-EC portfolio (not bintec W500)
TPC TPC (transmission power control): For 5 GHz, automatic reduction of transmission power
according EN301893
Data rates for 802.11b,g (2.4 GHz) 11, 5.5, 2 und 1 Mbps (DSSS modulation); 54, 48, 36, 24, 18, 12, 9 and 6 Mbps (OFDM
modulation)
Fast roaming 802.1x (access point
mode)
Pre authentication and PMK caching allows fast roaming by 802.1x encryption
Power Managment for Clients Registering of up to 250 clients simultaneously in access point mode.
Buffer pool For cushioning of peaks
Bandwidth (802.11n) 20/40 MHz (bundling of two adjoining 20 MHz channels to one 40 MHz channel)
Short guard interval (802.11n) On/off switchable; increase of throughput by reduction of the guard intervals from 800ns to
400ns
RTS/CTS RTS/CTS threshold adjustable
DTIM Period Adjustable
VLAN Network segments on layer2 possible. Per SSID one VLAN ID available. Static VLAN
configuration according IEEE 802.1q; up to 32 VLANs supported.
Multi SSID Depending on the complexity of configuration up to 8 service sets per radio module, with
virtual access points and own MAC address per SSID.
Inter Cell Repeating Inter traffic blocking for public hot spot (PHS) applications for preventing of communication
radio client to radio client in a single radio cell.
Funkwerk Enterprise Communications GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - (0)911 9673 0
Fax: +49 - (0)911 688 0725
bintec RS232bw
09.09.2010
Subject to technical
alterations
