Productos de la Marca Chrysler

Audio System Upgrade Package

2007-UP Dodge Avenger (Non Convertible Only)

2007-2010 Chrysler Sebring (Non Convertible Only)

2009-UP Dodge Ram Truck

2011-UP Chrysler 200

2011-UP Chrysler 300 Base Audio

2011-UP Dodge Charger Base Audio

2014-Up Jeep Cherokee (Six Speaker Base Audio)

Installation Instructions

77KICK28AB 7-2-2013 Page 2 of 13

Fig. 3

Fig. 4

Fig. 5

Fig. 6

4. Using a pick tool pry the screw cover in the door armrest pocket loose to reveal the two screws.

The screw cover is hinged toward the outside of the door panel. Remove the two screws. Fig. 3

5. Using a panel removal tool gently pry the door panel away from the door. Fig. 4

6. Disconnect the door handle linkage by rotating the plastic latch and pulling the linkage cable loose

from the lever. Next, pull back on the cable housing and slide the cable through the slot in the

plastic. Fig. 5

7. Disconnect door wiring and set door panel aside.

8. Using a Torx T-20 driver remove the four screws securing the speaker, disconnect wiring and

remove speaker.

9. Install the upgrade speaker with the included spacer ring (P/N RISPACER), using the supplied 1”

Phillips head screws and tighten. Fig. 6

10. Replace all previously removed parts in reverse order.