Audio System Upgrade Package
2007-UP Dodge Avenger (Non Convertible Only)
2007-2010 Chrysler Sebring (Non Convertible Only)
2009-UP Dodge Ram Truck
2011-UP Chrysler 200
2011-UP Chrysler 300 Base Audio
2011-UP Dodge Charger Base Audio
2014-Up Jeep Cherokee (Six Speaker Base Audio)
Installation Instructions
77KICK28AB 7-2-2013 Page 13 of 13
© 2007, Chrysler, LLC. Mopar is a registered trademark of Chrysler, LLC. All rights reserved.
14. Lift the door trim panel up and out.
Position the door trim panel
slightly away, do not remove.
15. Pull the interior handle (1) out fully
from the notch (2) to detach from
the trim panel (3).
16. Disconnect electrical connectors
and remove the door trim panel (3).
17. Remove the mounting fasteners
(1).
18. Remove the speaker (2) from the
door.
19. Disconnect the wire harness
connector from the speaker
20. Connect replacement speaker and
reinstall in reverse order.
21. Repeat steps 8-20 for other door
speaker.
22. Replace all previously removed trim panels in reverse order.
23. Reconnect negative battery cable.
