Audio System Upgrade Package
2007-UP Dodge Avenger (Non Convertible Only)
2007-2010 Chrysler Sebring (Non Convertible Only)
2009-UP Dodge Ram Truck
2011-UP Chrysler 200
2011-UP Chrysler 300 Base Audio
2011-UP Dodge Charger Base Audio
2014-Up Jeep Cherokee (Six Speaker Base Audio)
Installation Instructions
77KICK28AB 7-2-2013 Page 11 of 13
© 2007, Chrysler, LLC. Mopar is a registered trademark of Chrysler, LLC. All rights reserved.
Jeep Cherokee
Instrument Panel Speaker
1. Disconnect and isolate the negative
battery cable.
2. Using a non-marring panel removal
tool, remove the speaker grille from
the top of the instrument panel.
3. Remove the two fasteners (1)
securing the speaker (2) to the
instrument panel.
4. Lift the speaker up and disconnect
the wiring harness.
5. Remove the speaker from the
vehicle.
6. Connect replacement speaker and
reinstall in reverse order.
7. Repeat steps 2-6 for other instrument
panel speaker.
Front Door Speaker
8. Using a non-marring panel
removal tool, remove and
disconnect the window switch (1)
from the door.
9. Using a non-marring panel
removal tool, remove the liner (4)
from the door trim pull handle.
10. Remove the fastener (3)
securing the door trim panel to
the carrier plate.
