10
If you need to reset your timings to the standard program and start again, press SET and +
together to go back to the pre-set program.
The standard program-
The system will come on for up to 3 heating periods every 24hrs. ON1 starts the first one.
OFF1 finishes it, and so on. Notice that ON2 and OFF2 are set to the same time. This
means that your system won’t respond, but if you want to activate that middle period or
any change any other timing – read on.
Changing the timings-
• Press the SET? button and you’ll see the SET PROG?
• Press the YES button, and you’ll see ON1, the start of your first heating period.
Adjust it in 1 minute steps using the – and + buttons. If the – and + buttons are
held down, the time changes in 10 minute steps.
• Press SET?, and you’ll see OFF1, the end of your first heating period. Adjust this
in the same way, press SET?, then repeat the procedure for ON2, OFF2, ON3
and OFF3.
• When you press SET? after setting OFF3, the timeswitch will return to the nor-
mal operation.
43
Indesit 1060W:
Select suitable washing programme, prepare the laundry for washing and press the ON/
OFF switch to switch the machine on.
If the amount of laundry you intend to wash is smaller, use the half pro-
gramme. This will help you save energy and water. Don’t forget to use less washing pow-
der as well.
For an economy wash at 60˚ press the ‘e/60˚’ button. This program can be used to
reduce running costs by using less water and electricity for smaller wash loads and should
be used on items that are less soiled.
Please note to select a half wash, an economy wash of to turn the machine on you should
decompress the button, when the machine is off the on/off button will be compressed.
The program settings for the Indesit are as follows:
