13
3. Press the NORMAL 65° programme push button, the correspondent indicator
light keeps flashing while the indicator light of the INTENSIV 65° push button
turns off.
At the same time the indicator light
"end of programme" starts to flash.
4. Press the NORMAL 65° push button again, the
"end of programme" indicator
light turns off, this means that the rinse aid indicator light has been deactivated.
5. To memorise the operation, switch off the dishwasher by pressing the On/Off
push button.
To reactivate the rinse aid indicator light follow the same process until the "end of
programme" indicator light starts to flash.
Adjusting the dose
According to the finish and drying results obtained, adjust the dose of rinse aid by
means of the 6 position selector (C) (position 1 minimum dosage, position 6
maximum dosage).
Increase the dose if there are drops of water or lime spots on the dishes after
washing.
Reduce it if there are sticky whitish streaks on the
dishes.
BR02
°
SO497
°
SO499
152976 15/2en-es 9-09-2003 15:14 Pagina 13
