12
Rinse aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and
spot and streak free drying. The dispenser, which is positioned inside the door, holds
about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes,
depending upon the dosage setting.
Filling with rinse aid
1. Open the container by turning the lid (A)
anticlockwise.
2. Add the rinse aid until the container is
completely full.
The indicator (B) will be completely dark.
3. Top up the rinse aid when the rinse aid
indicator light on the control panel illuminates.
If rinse aid refilling is necessary, the rinse aid
indicator light will illuminate only in setting
mode and at the end of the washing
programme.
During the run of the programme it will remain
off.
Ensure that the lid is closed after every refill.
Do not put liquid detergent in the rinse aid
compartment. Clean up any rinse aid spilt during
filling with an absorbent cloth to avoid excess foaming during the next wash.
It is possible to deactivate the rinse aid indicator light (see the following
instructions).
By default the rinse aid indicator light is active.
To deactivate the rinse aid indicator light be sure that
the dishwasher is off and then proceed as follows:
1. Press INTENSIV 65° and NORMAL 65° programme push buttons simultaneously.
2. While keeping the programme push buttons INTENSIV 65° and NORMAL 65°
pressed switch on the dishwasher by pressing the On/Off push button.
The On/Off indicator light comes on.
At the same time, the indicator lights of the INTENSIV 65° and NORMAL 65°
push buttons start flashing.
BR01
BR03
152976 15/2en-es 9-09-2003 15:14 Pagina 12
