Installation
• Make sure that the appliance is not damaged
because of transport. Do not connect a dam-
aged appliance. If necessary, contact the
supplier.
• Remove all packaging before first use.
• A qualified and competent person must do
the electrical installation.
• A qualified and competent person must do
the plumbing installation.
• Do not change the specifications or modify
this product. Risk of injury and damage to the
appliance.
• Do not use the appliance:
– if the mains cable or water hoses are dam-
aged,
– if the control panel, worktop or plinth area
are damaged, that you can get access to
the inner side of the appliance.
Contact your local Service Force Centre.
• Do not drill into the sides of the appliance to
prevent damage to hydraulic and electrical
components.
Warning! Carefully obey the instructions
for electrical and water connections.
Control panel
1 2 3
5
4
1
Programme knob
2
Start/cancel button (Start/Cancel)
3
Half-load button (Half Load)
4
Indicator lights
5
On/off indicator light
Indicator lights
End Comes on when the washing programme is completed. Auxiliary functions:
• Level of the water softener.
• An alarm if the appliance has a malfunction.
Salt
1)
Comes on when it is necessary to fill the salt container. Refer to 'Use of
dishwasher salt'.
After you fill the container, the salt indicator light can continue to stay on
for some hours. This does not have an unwanted effect on the operation of
the appliance.
3
www.zanussi.com
