CHANGING MODIFIERS AND OPTIONS
DURING THE WASH CYCLE
You can change a Modifier or Option anytime
before the selected Modifier or Option begins.
You must:
1.
Press STOP once.
2.
Select the desired' Modifiers andlor Op-
tions.
3.
Press START.
TO DRAIN THE WASHER MANUALLY
1.
Press STOP twice.
2.
Press POWER.
3.
Press RINSEIDRAIN
&
SPIN.
4.
Press START.
When the spin is complete, the lid unlocks.
Items can be removed from the washer.
STATUS
LIGHTS
These lights show which portion of the cycle
the washer is operating. They also indicate
when you can add other garments to the wash
load.
SrAl-43
Airel&-
:':
am@
LOAD IS DONE
The Clothes Clean light stays on until the lid is
opened or the Power button is pressed.
INDICATOR LIGHTS
An indicator light shows which Cycle, Modifiers
and Options you have selected.
ESTIMATED TIME. REMAINING
.
Cycle time in minutes will appear in the display
while you are making selections. The total cycle
time will appear, including an estimated time for
drain and fill times, once Start is pressed.
NOTES:
The time is an estimation only and may vary
depending on load size, cycle, modifiers and
options selected.
You may notice the time adjusting during the
cycle. This is normal.
The cycle time may be extended if oversuds-
ing occurs or the load is unbalanced.
CYCLES
Turn the knob to choose the right wash cycle
for the type of fabrics you are washing. When
the knob points to a cycle, the indicator light
for the cycle will glow. If the default settings
for the Modifiers and Options are suitable for
the wash load, you may press Start to begin
the wash cycle.
LID LOCK
When the Lid Lockstatus light glows, the washer
PRESET CYCLE SETTINGS
lid is locked.
For ease of use, preset cycle settings provide
NOTES:
the recommended fabric care settings for each
cycle.
You must wait until the Lid Lock light turns
off before the lid can be opened.
If the lid is open for
30
seconds with water
in the tub, the pump will activate and drain
the tub.
