7. Set the water Temperature selector to the correct setting for
the type of fabric and soils being washed. Use the warmest
wash water safe for fabric. Follow garment label instructions.
Water Temp Use for
Hot Whites and pastels
Heavy soils
Warm Bright colors
Moderate to light soils
Cold Colors that bleed or fade
Light soils
8,
NOTE: In wash water temperatures colder than 70°F (21°C),
some detergents do nat dissolve well. Soils can be difficult to
remove. Some fabrics can retain wear wrinkles and have
increased pilling (the formation of small lint-like bails on the
surface of garments).
(OPTIONAl_) An ACCUWASH TM Temperature Control System
electronicaily senses and maintains a uniform water
temperature by regulating incoming hot and cold water.
a Even in cold wash, some warm water is let into the
washer to maintain a minimum temperature of
approximately 70°F (21°C).
a
a
Warm wash is maintained at approximately 90°F (320(3).
Warm rinas is maintained at approximately 70°F (21°C) for
all warm rinse settings. To reduce wrinkling, the warm
rinse is regulated to be cooler than the warm wash.
(RINSE OPTIONS) You can customize your wash by adding
the Extra Rinse option to your cycle selections. A cycle will
"start" where you sat the Cycle Selector Control knob. See
"Selecting a Cycle." The cycle will "stop" where you sat the
Extra Rinse control knob. This knob has settings for:
a Off. Uas this option for one dnas after a basic wash cycle,
Rinse & Spin, and Drain & Spin.
a On. An Extra Rinse can be added to the Normai and
Whitest Whites cycles.
9. Set the Fabric Select control knob according to the type of
fabric inthe load. See "Selecting Wash/Spin Speeds."
10. Push inthe Cycle Selector Control knob and turn itto the
wash cycle you want. Reduce the wash time when using a
small load size setting. See "Selecting a Cycle."
Pull out the Cycle Selector Control knob to start the washen
To stop or restart your washer
a To stop the washer at any time, push in the Cycle Selector
Control knob.
a To restart the washer, close the lid (if open) and pull out
the Cycle Selector Control knob.
Selecting a Cycle
This section describes the available wash cycles and will help
you make the bast cycle selections for your wash loads. Each
cycle is designed for different types of fabric and soil levels.
a The washer pauses briefly throughout each cycle. These
pauses are normal. Refer to "Normal Sounds" to learn more
about the sounds you may hear during a wash cycle.
= Refer to "Understanding Washer Cycles" to learn what
happens during a wash cycle.
NOTE: Use this control to choose agitation time and to start the
washer. For heavy soil and sturdy fabrics, use the full time. Use
lass time for light soil and delicate fabrics.
NORMAL CASUAL
PvmanemtPlrem
u
Regull_
Cycle Selector Control knob
CATALYST= Cleaning Action
Your washer uses the CATALYST®Cleaning Action to help ensure
better soil and stain removai from your wash load, CATALYST"
Cleaning Action reduces the need for prstreatmant and is safe for
all fabrics, The CATALYST" Cleaning Action is available in the
Whitest Whites and Normal cycles, Although CATALYS'ITM
Cleaning Action is available on all Fabric Select control settings,
for the best cleaning performance, select Cotton/Heavy when
selecting the Catalyst cycle option.
NOTE: To add CATALYS'P Cleaning Action to your wash cycle,
you must sat the Cycle Selector Control knob to the Catalyst_
setting.
How CATALYST e Cleaning Action works
1. Before agitation begins, detergent is automatically released
into a special chamber that mixes the detergent with a small
amount of water to create a sudsy cleaning solution.
2. Spinning spreads out the clothas.
3. The cleaning solution showers onto the top of the fabrics. The
solution is pulled through the clothes, and the detergent
enzymes attach to soils and stains, liftingthem away.
4. The washer fills to the aslected water level and complates the
selected cycle.
NOTES:
a For bast results, the load should be dry at the start of the
cycle.
a Stubborn and ast-in stains might require additionai
pretrsatmant.
Normal cycle
Use this cycle for most loads to get between 6 and 15 minutes of
wash time. For heavily soiled clothes, select the CATALYS'I_
Cleaning Action cycle and Cotton/Heavy on the Fabric Select
control.
7
