Overview
1.3 Configuration of the devices
Comfort Panels
20 Operating Instructions, 03/2012, A5E03404994-02
Interfaces for the 7", 9" and 12" models
The figure below shows the interfaces for the following HMI devices:
● KP700 and TP700 Comfort
● KP900 and TP900 Comfort
● KP1200 and TP1200 Comfort
① X80 power supply connector ⑤ X1 PROFINET (LAN), 10/100 Mb
② Connection for equipotential bonding (ground) ⑥ X90 Audio Line IN / OUT
③ X2 PROFIBUS (Sub-D RS422/485) ⑦ X60 USB type Mini B
④ X61 / X62 USB type A
Interfaces for the 15", 19" and 22" models
The figure below shows the interfaces for the following HMI devices:
● KP1500 and TP1500 Comfort
● TP1900
● TP2200 Comfort
① X80 power supply connector ⑤ X1 PROFINET (LAN), 10/100 Mb
② Connection for equipotential bonding (ground) ⑥ X61 / X62 USB type A
③ X2 PROFIBUS (Sub-D RS422/485) ⑦ X90 Audio Line IN / OUT
④ X3 PROFINET (LAN), 10/100/1000 Mb ⑧ X60 USB type Mini B
Further information
Use the X1 or X60 interface to connect a configuration PC. Use the X61 / X62 interfaces to
connect peripheral devices such as a printer or keyboard. Use the X90 interface to connect a
loudspeaker.
You can affix the USB and PROFINET connecting cables to the rear panel of the HMI device
with cable ties.
With the 4" and 7" models, protect the cables with a separate strain relief. Attach the strain
relief to the HMI device.
See also
Description of the ports (Page 205)
