Problem solving guide
69
Water inlet fault
Problem Cause and remedy
The Inle
t/Drain indica‐
tor flashes on and off.
The stopcock is closed.
Open the st
opcock fully.
The dishwasher stops
during a programme.
The Inlet/Drain indica‐
tor flashes.
Fault code or ap‐
pears in the display.
Before rectifying the problem:
Switch the dishwasher off with the b
utton.
The water intake is restricted.
Op
en the stopcock fully and start the programme
again.
Clean
the water inlet filter (see "Maintenance").
The wat
er pressure at the intake is lower than 30
kPa (0.3 bar).
Seek professional advice.
