Problem solving guide
67
Most minor faults in the performance of the appliance, some of which may result
fr
om incorrect operation, can be put right without contacting the Service Depart‐
ment.
The following guide may help you to find the reason for a fault, and to correct it.
Y
ou should, however, note the following:
Unauthorised or incorrect repairs could cause personal injury or damage to
the appliance.
Repair work to electrical appliances should only be carried out by a suitably
quali
fied and trained person in strict accordance with current local and national
safety regulations. The manufacturer cannot be held liable for unauthorised
work.
Technical problems
Problem Cause and remedy
The S
tart indicator does
not flash after switching
the dishwasher on with
the button.
The appliance is not plugged in.
Inser
t the plug and switch on at the socket.
The mains fuse has tripped.
Reset the trip sw
itch in the mains fuse box or re‐
place the fuse in the plug (minimum fuse rating -
see data plate).
The dishwasher stops
durin
g a programme.
The mains fuse has tripped.
Reset the trip sw
itch in the mains fuse box or re‐
place the fuse in the plug (minimum fuse rating -
see data plate).
If the mains fuse trips again, call the Miele Service
Department.
The door locking pins
do not r
etract after the
door has opened auto‐
matically.
There is a fault with the door mechanism or the door
has n
ot been correctly balanced.
C
all Miele Service.
The AutoOpen function must be switched off be‐
fore the dishwasher is used again (see
"AutoOpen"). Danger of injury in the unlikely event
of another fault.
