Programme options
56
Optimise standby
"Optimise standby" is activated by de‐
fault.
To save energy the dishwasher will
switch off aut
omatically a few minutes
after the last time a button has been
pressed or after the end of a pro‐
gramme.
The dishwasher will not switch off
whilst a pr
ogramme is running, during
the Delay start period or if there is a
fault.
Optimise standby can be switched off if
you pr
efer. If you do this the duration
before the dishwasher switches off au‐
tomatically increases to 6 hours. Doing
this will increase energy consumption.
Switch the dishwasher off with the
button, if it is switched on.
P
ress the
Start butt
on in and whilst
holding it in switch the dishwasher
on using the button.
Keep the
Start
button pressed in for
at least four seconds until the
Start
indicat
or light comes on.
If this does not happen, start the proce‐
dure from the beginning again.
P
ress the button 8 times.
The indica
tor will flash rapidly 8
times at intervals.
The flashing sequence in the display
shows whether Optimise standby is ac‐
tivat
ed or not.
– : "O
ptimise standby" activated
– : "O
ptimise standby" deactivated
P
ress the
Start butt
on to change the
setting.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
