Programme options
57
Factory default
If you have altered any settings from
the fact
ory default, you can re-set them
back to the factory default settings.
Switch the dishwasher off with the
button, if it is switched on.
P
ress the
Start butt
on in and whilst
holding it in switch the dishwasher
on using the button.
Keep the
Start
button pressed in for
at least four seconds until the
Start
indicat
or light comes on.
If this does not happen, start the proce‐
dure from the beginning again.
P
ress the button 19 times.
The indica
tor will flash once slowly
and then rapidly 9 times at intervals.
The flashing sequence in the display in‐
dicat
es whether a setting has been
changed from its factory default.
– : All setting
s are set to factory de‐
fault settings.
– : At least one setting has been
changed.
T
o reset the dishwasher to the factory
default settings, press the
Start but‐
t
on.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
