Additional options
Factory default settings
If you have altered any settings from
the factory default, you can reset them
back to the factory default settings as
follows:
^
Switch the dishwasher off with the
On/Off button K.
^
Turn the programme selector to the
"12 o'clock" position.
^
Press the Start/Stop button in and,
whilst holding it in, switch the
dishwasher on using the On/Off
button K.
Keep the Start/Stop button pressed in
for at least four seconds until the
"Start/Stop" indicator light comes on.
If this does not happen, start the
procedure from the beginning again.
^ Turn the programme selector to the
"11 o'clock" position.
The "Wash/Rinse" indicator light will not
be lit up.
^
Press the Start/Stop button.
The "Wash/Rinse" indicator will now
flash briefly at intervals.
^
Turn the programme selector to the
"9 o'clock" position.
The Wash/Rinse indicator light shows
whether a setting other than the factory
default setting has been set.
–
If the Wash/Rinse indicator light is
flashing:
All settings are factory default
settings.
–
If the Wash/Rinse indicator light is
not lit up:
At least one setting has been altered
from the factory default setting.
^
To reset the dishwasher to the factory
default settings, press the Start/Stop
button.
^ Switch the dishwasher off with the
On/Off button K.
Operation
35
