Standby
To save energy, the dishwasher will
switch to Standby mode a few minutes
after the last time a button has been
pressed or at the end of the
programme. The indicator lights are
switched off and only the Start/Stop
indicator flashes slowly.
^
To switch the indicator lights back
on, press the Start/Stop button.
Standby will be cancelled.
The dishwasher will not switch to
Standby mode whilst a programme
is running, if salt or rinse aid needs
to be refilled, or if there is a fault.
At the end of a programme
The "End" indicator light will come on at
the end of the programme.
The drying fan will run for a few
minutes after the end of the Quick
wash programme.
The dishwasher can now be opened
and unloaded (see "Unloading the
dishwasher").
,
To prevent the risk of steam
damage to the worktop edging
above the dishwasher, it is
advisable to leave the door closed
until you are ready to unload the
crockery. Alternatively, you can
open the door fully until the crockery
is cool enough to unload. Do not
leave the door only partially open.
Switching off
At the end of a programme:
^
Switch the dishwasher off using the
On/Off button K.
The dishwasher will continue to use
electricity until it is switched off with
the On/Off button K.
If the dishwasher is not going to be
used for a longer period of time, e.g.
whilst on holiday, the tap should be
turned off.
Unloading the dishwasher
Dishes tend to break and chip more
easily when they are hot.
Allow the dishes to cool until they are
comfortable enough to handle before
unloading them.
If you open the door fully after switching
off, the dishes will cool much faster.
^
First unload the lower basket, then
the upper basket and finally the
cutlery tray (depending on model).
This will prevent water drops from the
upper basket and cutlery tray from
falling onto the dishes in the lower
basket.
Operation
33
