bintec RS353aw
04.06.2015
Subject to technical alterations
Page 6 / 12
bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
WLAN Electric Characteristics
Receiver Sensitivity @ 2.4 GHz
802.11n 40 MHz
MCS0 -92 dBm; MCS1 -91 dBm; MCS2 -89 dBm; MCS3 -86 dBm; MCS4 -82 dBm; MCS5 -79 dBm;
MCS6 -77 dBm; MCS7 -75 dBm; MCS8 -91 dBm; MCS9 -91 dBm; MCS10 -89 dBm; MCS11 -85 dBm;
MCS12 -82 dBm; MCS13 -78 dBm; MCS14 -77 dBm; MCS15 -74 dBm
Receiver Sensitivity @ 5 GHz
802.11a/h
6 Mbps -95 dBm;9 Mbps -94dBm; 12 Mbps -93 dBm; 18 Mbps -90 dBm; 24 Mbps -88 dBm; 36 Mbps
-84 dBm; 48 Mbps -82 dBm; 54 Mbps -81 dBm
TX power @ 2,4 GHz 802.11n 20
MHz
MCS0/8 19 dBm; MCS1/9 19 dBm; MCS2/10 19 dBm; MCS3/11 19 dBm; MCS4/12 19 dBm; MCS5/13
19 dBm; MCS6/14 19 dBm; MCS7/15 19 dBm
TX power @ 2,4 GHz 802.11n 40
MHz
MCS0/8 19 dBm; MCS1/9 19 dBm; MCS2/10 19 dBm; MCS3/11 19 dBm; MCS4/12 19 dBm; MCS5/13
19 dBm; MCS6/14 19 dBm; MCS7/15 19 dBm
Routing
Multicast IGMP Support of Internet Group Management Protocol (IGMP v1, v2, v3) for the simultaneous distribution
of IP packets to several stations
Multicast IGMP Proxy For easy forwarding of multicast packets via dedicated interfaces
Policy based Routing Extended routing (Policy Based Routing) depending of diffent criteria like IP protocols (Layer4),
source/destination IP address, source/destination port, TOS/DSCP, source/destination interface and
destination interface status
Multicast inside IPSec tunnel Enables the transmission of multicast packets via an IPSec tunnel
RIP Support of RIPv1 and RIPv2, separated configurable for each interface
Extended RIP Triggerd RIP updates according RFC 2091 and 2453, Poisened Rerverse for a better distribution of
the routes; furthermore the possibility to define RIP filters for each interface.
Protocols / Encapsulations
DNS DNS client, DNS server, DNS relay and DNS proxy
PPP/MLPPP Support of Point to Point Protocol (PPP) for establishing of standard PPP connections, inclusive the
Multilink extension MLPPP for the bundeling of several connections
IPoA Enables the easy routing of IP via ATM
PPPoE (Server/Client) Point-to-Point Protocol over Ethernet (Client and Server) for establisching of PPP connections via
Ethernet/DSL (RFC 2516)
DNS Forwarding Enables the forwarding of DNS requests of free configurable domains to assigned DNS server.
MLPPPoE (Server/Client) Multilink extension MLPPPoE for bundeling several PPPoE connections (only if both sides support
MLPPPoE)
DYN DNS Enables the registering of dynamic assigned IP addresses at adynamic DNS provider, e.g. for
establishing of VPN connections
DHCP DHCP Client, Server, Proxy and Relay for siplified TCP/IP configuration
PPPoA Point to Point Protocol over ATM for establishing of PPP connections via ATM/DSL
Packet size controling Adaption of PMTU or automatic packet size controling via fragmentation
