
3. Switch the machine on by turning the selector dial
to the set washing programme/fabric.
4. Select the required options by pressing the rele-
vant buttons.
If possible, do not select a spin speed lower
than that proposed by the appliance to avoid
too long a drying time therefore saving energy.
In any case the reduction of the spin speed is only
possible after selecting drying.
For cottons and synthetic the lowest value you can
select is 900 r.p.m.
5. Set the dryness degree by pressing button 3. The
display shows the whole duration of the washing
and the set drying cycle.
6. Start the programme by pressing button 7. The
time remaining is updated every minute on the dis-
play.
7. At the end of the programme turn the selector dial
to the
position to switch the machine off. Re-
move the laundry.
NON-STOP programme - Washing and Timed Drying
The recommended load size is 3.5 kg for cotton and 2
kg for synthetic.
It is also possible to dry up to 5 kg of cotton items
(see the «Drying Programme » table).
Caution! Do not use a dosing device/ball when
carrying out a washing and drying programme.
1. Load the laundry and add detergent and fabric
softener.
2. Switch the machine on by turning the selector dial
to the set washing programme/fabric.
3. Select the required options by pressing the rele-
vant buttons.
If possible, do not select a spin speed lower
than that proposed by the appliance to avoid
too long a drying time therefore saving energy.
In any case the reduction of the spin speed is only
possible after selecting drying.
The lowest values you can select are 900 r.p.m. for
cottons and synthetics and 700 r.p.m. for delicate
fabrics.
4. Set the drying time by pressing button 4. The dis-
play shows the whole duration of the washing and
the set drying cycle.
If you set a washing programme and only 10 mi-
nutes of drying cycle, the total duration displayed
includes also the unrolling and the cooling phase.
5. Start the programme by pressing button 7. The
time remaining is updated every minute on the dis-
play.
6. At the end of the programme turn the selector dial
to the
position to switch the machine off and re-
move the laundry.
Care and cleaning
Warning! You must DISCONNECT the appliance
from the electricity supply, before you can carry
out any cleaning or maintenance work.
Descaling
The water we use normally contains lime. It is a good
idea to periodically use a water softening powder in the
machine. Do this separately from any laundry washing,
and according to the softening powder manufacturer's
instructions. This will help to prevent the formation of
lime deposits.
External cleaning
Clean the exterior cabinet of the appliance with soap
and water only, and then dry thoroughly.
Cleaning the dispenser drawer
The washing powder and additive dispenser drawer
should be cleaned regularly.
18