
3. Select, if necessary, optional functions
and/or the delay start. Refer to 'Control
panel'.
4. Press the OK/Start button to confirm.
5. Close the appliance door. The washing
programme starts automatically.
The opening of the appliance door inter-
rupts the countdown. When you close
the door, the countdown continues from
the point of interruption.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues
from the point of interruption.
How to cancel a washing programme or
a delay start
If a washing programme or a delay start
has not started, you can change the se-
lection.
When a washing programme or a delay
start operate, it is not possible to change
the selection. It is necessary to cancel
the washing programme or the delay
start to make a new selection.
When you cancel the delay start, this au-
tomatically cancels the selected wash-
ing programme. You have to select the
washing programme again.
1. At the same time press and hold the OK/
Start button and the optional function
button.
2. Release the buttons when the display
shows the message CONFIRM CAN-
CEL ?.
3. Press the OK/Start button to confirm and
cancel the washing programme.
4. Make sure that there is detergent in the
detergent dispenser before you start a
new washing programme.
At the end of the washing programme
• The appliance stops automatically.
• The audible signals operate.
1. Open the appliance door.
– The display shows the messages that
tell you that the washing programme is
completed and to switch off the appli-
ance
2. The display shows the messages PRO-
GRAMME END and PLEASE SWITCH
OFF.
3. Switch off the appliance.
4. For better drying results, keep the door
ajar for some minutes.
• If you do not switch off the appliance,
after three minutes from the end of the
washing programme:
– The intensity of the display light au-
tomatically decreases. The display
continues to show the messages.
– The optical signal goes off.
This helps to decrease energy con-
sumption.
Press one of the buttons (not the on/off
button), the intensity of the display light
increases and the optical signal comes
on again.
Remove the load
• Let the dishes become cold before you re-
move them from the appliance. Hot dishes
are easily damaged.
• First remove the items from the lower bas-
ket, then from the upper basket.
• There can be water on the sides and door
of the appliance. Stainless steel becomes
cool more quickly than the dishes.
electrolux 33