Water hardness Water hardness adjustment
°dH °TH mmol/l Clarke manually electronically
29 - 36 51 - 64 5,1 - 6,4 36 - 45
2
1)
7
23 - 28 40 - 50 4,0 - 5,0 28 - 35
2
1)
6
19 - 22 33 - 39 3,3 - 3,9 23 - 27
2
1)
5
1)
15 - 18 26 - 32 2,6 - 3,2 18 - 22 1 4
11 - 14 19 - 25 1,9 - 2,5 13 - 17 1 3
4 - 10 7 - 18 0,7 - 1,8 5 - 12 1 2
< 4 < 7 < 0,7 < 5
1
2)
1
2)
1) Factory position.
2) No use of salt is necessary.
You must adjust the water softener man-
ually and electronically.
Manual adjustment
Turn the water hardness dial to the position
1 or 2 (refer to the chart).
Electronic adjustment
1. Go into the menu.
2. Go to SETTINGS and then WATER
HARDNESS.
3. Use the optional function button to set
the level of the water softener. Refer to
the chart for the right level to set.
4. Press the OK button to confirm.
Use of dishwasher salt
Do these steps to fill the salt container:
1. Turn the cap counterclockwise to open
the salt container.
2. Fill the salt container with 1 litre of water
(only with the first operation).
3. Use the funnel to fill the salt container with
salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
It is correct that water comes out from
the salt container when you fill it with salt.
The display shows a message when the
salt container is empty.
After you fill the salt container, the mes-
sage can continue to stay on for some
hours. This does not have an unwanted
effect on the operation of the appliance.
The message, when the salt container is
empty, will not show while a washing
programme operates.
electrolux 29
