
When the salt container
needs refilling, the display
shows a message.
8.3 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
You can set the released quantity of rinse
aid between level 1 (minimum quantity)
and level 6 (maximum quantity). Level 0
will deactivate the rinse aid dispenser and
no rinse aid will be released.
Factory setting: level 4.
How to fill the rinse aid
dispenser
CAUTION!
Only use rinse aid specifically
designed for dishwashers.
1. Open the lid (C).
2. Fill the dispenser (B) until the rinse aid
reaches the marking ''MAX''.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Close the lid. Make sure that the lid
locks into position.
Fill the rinse aid dispenser
when the indicator (A)
becomes clear.
When the rinse aid dispenser
needs refilling, the display
shows a message.
If you use multi-tablets and the drying
performance is satisfactory, the rinse aid
refill indication can be disabled by setting
the rinse aid level to 0.
We recommend to always
use rinse aid for better drying
performance, also in
combination with multi-
tablets containing rinsing
agent.
9. DAILY USE
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
• If the display shows the salt refilling
message, fill the salt container.
• If the display shows the rinse aid
refilling message, fill the rinse aid
dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme
for the type of load and the degree of
soil.
ENGLISH
15