7.1 How to set an option
The option list will show only the options
applicable to the currently selected
programme. Non-applicable options are
not visible.
Some options are not compatible with
each other. When you set 2 options that
are not compatible with each other, the
appliance will automatically deactivate one
of the options.
When the programme is completed or is
cancelled the options are set to the default
values.
You can enter the option list from any
programme in the programme list.
1. Press the Option key.
2. Select an option.
The display shows the option value
indicated in parenthesis.
3. Press the OK key to change the value
from OFF to ON or vice versa.
4. If you want to set another option,
repeat step 2 and 3.
5. To go back to the programme list,
press the Back.
The display shows the selected
programme.
7.2 XtraDry
Activate this option when you want to
boost the drying performance. With the
use of this option, the duration of some
programmes, water consumption and the
last rinse temperature can be affected.
The option XtraDry is not a permanent
option and must be selected at every
cycle.
7.3 TimeSaver
This option increases the pressure and the
temperature of the water.
The washing and drying phases are
shorter. The total programme duration
decreases by approximately 50%.
The washing results are the same as with
the normal programme duration but the
drying results can be less satisfactory.
The option is not applicable to all the
available programmes.
When the option is applicable to the
programme, you can choose to activate or
deactivate the TimeSaver option.
If you have also set an option
that is in conflict with
TimeSaver, it will not be
possible to choose
TimeSaver.
Select a programme and press the OK
key.
If TimeSaver is applicable, the display
shows the conditions Fast and Normal
and the programme duration for each
condition:
• Fast: select this condition to
activate TimeSaver and press the
OK key to confirm.
• Normal: select this condition to
deactivate TimeSaver and press
the OK key to confirm.
7.4 Child lock
This option prevents children to play with
the keys on the control panel while a
programme is running or when the
appliance is activated and ready for use.
If you activate the option Child lock while
the programme ECO is running, the option
AutoOpen is automatically deactivated.
Press at the same time the down
navigation key and the OK key.
The display shows the message that the
Child lock option is active.
To deactivate the Child lock option, repeat
the procedure.
7.5 AutoOpen
AutoOpen improves the drying results with
less energy consumption.
www.electrolux.com12
