Fault codes and malfunction Possible cause and solution
• point-shaped optical signal is flash-
ing,
• intermittent audible signal,
•
appears in the digital display
The dishwasher will not drain
• The sink spigot is blocked.
Clean out the sink spigot.
• The water drain hose has not been
correctly laid or it is kinked or
squashed.
Check the water drain hose connec-
tion.
• point-shaped optical signal is flash-
ing,
• intermittent audible signal,
•
appears in the digital display
Anti-flood device is activated
• Close the water tap and contact your
local Service Force Centre.
The flashing of the point-shaped op-
tical signal on the floor beneath the
dishwasher door will not be visible if
the appliance has been installed
higher up with a furniture door
mounted flush.
Malfunction Possible cause and solution
The programme does not start • The dishwasher door has not been
properly closed. (Open door indica-
tor light illuminated).
Close the door.
• The main plug is not plugged in.
Insert the main plug
• The fuse has blown out in the house-
hold fuse box.
Replace the fuse.
• Delay start has been set.
If dishes are to be washed
immediately, cancel the delay start.
Once these checks have been carried
out; switch on the appliance and close
the door.
The programme will continue from the
point at which it was interrupted.
what to do if... electrolux 29
