2. Make sure that the salt container and
the rinse aid dispenser are full.
3. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
4.
Adjust the water softener to the water
hardness in your area.
5. Adjust the released quantity of rinse
aid.
5.2 Acoustic signals
The acoustic signals operate in these
conditions:
• The programme is completed.
• The level of the water softener is adjus-
ted electronically.
• The appliance has a malfunction.
Factory setting: On.
It is possible to deactivate the
acoustic signals.
How to deactivate the acoustic
signals
1.
Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to ‘Set-
ting and starting a programme’.
2.
Press and hold function buttons (B)
and (C) at the same time until the indi-
cators of function buttons (A), (B) and
(C) start to flash.
3.
Press function button (C),
• The indicators of function buttons
(A) and (B) go off.
• The indicator of function button (C)
continues to flash.
• The end indicator comes on.
4. Press function button (C). The end in-
dicator goes off, the acoustic signals
are deactivated.
5.
Deactivate the appliance to confirm
the setting.
How to activate the acoustic signals
1.
Refer to ‘How to deactivate the acous-
tic signals’, step (1) through (3).
2. Press function button (C),
• The indicators of function buttons
(A) and (B) go off.
• The indicator of function button (C)
continues to flash.
• The end indicator is off.
3. Press function button (C). The end in-
dicator comes on, the acoustic signals
are active.
4.
Deactivate the appliance to confirm
the setting.
6. BEFORE FIRST USE
1. Make sure that the set level of the wa-
ter softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4.
Open the water tap.
5. Processing residues can stay in the
appliance. Start a programme to re-
move them. Do not use detergent and
do not load the baskets.
6.1 Adjusting the water softener
Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l Clarke
degrees
Manual Elec-
tronic
51 - 70 91 - 125 9.1 - 12.5 64 - 88
2
1)
10
ENGLISH 7
